Wood Burning Boilers and Furnaces

 Typical Warm Air Furnace Installation (shows hookup of optional domestic hot water coil)


The top picture illustrates a typical hookup using your existing blower to move air past the Thermo-Control furnace.  The included fan switch will turn on the blower as needed.  The heat output is set with the control lever on the front door or using a thermostat if the electric control kit is ordered




The bottom illustration depicts the use of the optional blower pack which allows standalone operation with no ties to the existing oil fired furnace.  This is a good fit if your existing furnace is old and wood will be used for the greater majority of heating needs.

Slide a sheet metal blocker here when using wood furnace

Existing warm air furnace

Optional 4 speed blower pack

Existing domestic water heater with mixing valve